LineScale 2 | Slackline Spannung messen
Elektronischer Bluetooth-Dynamometer speziell für den Slackline-Einsatz zum messen der Slackline-Spannung – Version 2 des bekannten lineScale. 30kN WLL, etwa so groß wie eine große Hand, 20mm dünn, nur 495g leicht, und in brillanter Goldfarbe eloxiert! Großzügige D-förmig abgeschrägte, kreuzlastsichere Befestigungsöffnungen zur Aufnahme fast aller denkbaren Anschlussarten. Inklusive wiederaufladbarem Akku (über Micro-USB), Bluetooth-Verbindung, Smartphone-App und schützendem Filzbeutel.
The LineScale is a device milled out of one solid block of high-tensile aviation aluminum (LY12CZ), giving it a whopping 80kN MBS. In terms of safety this is the best deal you can get if you want to measure slackline tension. It has no bolts, screws, rings, pistons or joints that could possibly fail this is the security of mind you need when leaving the scale in the highline rig while walking it!
The lineScale 2, with its 80kN MBS, is perfectly suited as a bomber, generously dimensioned, nicely organized anchor/distribution point for your highline rig. The large omnidirectional, cross-load proof eyelets can easily accommodate 6-8 strands of 10mm rope from your equalizing anchors, which makes multi connector management an ease.
The lineScale works by the principle of material micro deformation: Wikipedia Strain Gauge
The slackline tension or force displayed unit is cofigurable (kg, lb,kN) and the auto power off time can easily be selected and saved as preset by the user.
High Tech Power Management
If no load change is registered for the preset shutoff interval the device will auto power off. It was essential for us to assure, that the scale does NOT calibrate its sensors to 0 when powered on, but immediately shows the current load. This enables you to power on and off manually anytime when you need a load reading. This saves an enormous amount of power and makes your scale go for months without having to recharge.
Of course the device has a low battery warning indicator, but additionally it also displays the voltage reading of the battery pack when powering on, so you can recharge in time. The lineScale also has a low power emergency operation mode that ensures your batteries are not drained without you noticing. When power is in the critical range it will automatically power off after 3 minutes in any case to save power.
Measure Slackline Tension Accurately
The 24Bit pro AD-Converter with dual strain gauge configuration has a resolution of 1kg with a measuring error of less than ±1% (only inside the sweet spot area of 300kg 1500kg / 3kN 15kN, which is 10-50% of maximum load). Please note: Below the sweet spot area the measuring error might be up to 15%, especially under 100kg this device is NOT a precision micro scale! See Limitations tab for further details.
The sensor scan rate (cycle rate) is 40Hz, meaning the lineScale reads and calculates the sensor load every 25ms, which makes it sensitive for fairly short peak loads. We promise to aim for the lowest possible scan rate within our budget.
Any peak load shorter than 25ms may be missed by the sensors, however, this is very, very unlikely for slackline use. See the limitations tab for further details.
30kN WLL, about the size of a large hand, 20mm thin, and 495g light.
For highest possible safety, the lineScale unibody is milled from a solid block of high-strength aviation aluminum, which results in 80kN breaking strength. The generous D-Shape chamfered attachment eyes are cross-load proof and will accept almost any conceivable connector such as steel shackles, biners, industrial slings, ropes, webbing and soft-shackles.
Bluetooth connectivity allows you to display/log the load and slackline tension values on your smartphone and set a custom load alarm threshold via the lineScale-App.
It comes with a light, perfectly fitting protective felt pouch.
- IP64 splash water dust proof design (Info protection class: Protected against dust, splash water and any type of rain, but not submergible in water!)
- Sensor scan rate (cycle rate): 40Hz (25ms) 10Hz (100ms)
- 24Bit high precision ADC
- dual strain gauge
- Bluetooth 4 interface (w. smartphone app)
- 3 units selection (kgf, lbf, kN) / Display division (resolution): 1kg / 2lbf / 0.01kN
- tare function (set current load to 0)
- slackline tension load peak display function
- lock display function
- Operating endurance: ca. 50 hours continuous (24h w. bluetooth enabled) / high tech power management / Power: 3.7V 1000mAh rechargeable Li-Ion battery pack
- Measure error: less than ±0.5% (@3kN-15kN)
- Operating temperature: +10 to +40°C / Storage temperature: -20 to +70°C / Relative humidity: 10% to 80% RH (Approved for operating temps as stated above, but Andy tested it at -10°C and found a minor linear deviation of 35kg / 0.35kN only)
- High strain aviation aluminum alloy LY12CZ in solid block construction
- anodized in brilliant gold color (Please note: Specs subject to change slightly during design and production phase!)
- Measurements (L x W x T): 190 x 90 x 20mm / Size attachment eyes: Radius 30mm D-Shape (ca. 60x40mm)
- Weight (incl. battery): 495 g (17 oz)
- Measuring range: -10% to 110% WLL / Maximum range: 3000kgf / 6600lbf / 30kN
- Working load limit (WLL): 30kN
- Minimum breaking strength (MBS): 80kN
This device is NOT a professional analytical device or laboratory/research qualified dynamometer on which to base a single 100% reliability calculation of an unredundant life support system! The lineScale scans the load every 25ms, which might lead to the fact, that an ultra short peak load is missed, such as may occur when doing anchor bolt testing with short slings in factor 2 falls, for instance. It may also lead to slightly reduced reading of a leash fall in a very short highline, because the 25ms reading interval might have occured a few milliseconds before or after the peak load.
Informationen zu Lieferung und Bezahlung
Versandkosten: 10.- CHF
Pauschal, unabhängig der Anzahl Produkte bis 20kg/ <1m Länge
Lieferung in 3 – 4 Tagen – Versand per Schweizer Post
Weitere Infos zum Versand und Rückgaben hier.
Bezahlung per Rechnung – Zahlungsfrist: 20 Tage
Sind noch Fragen? Beratung nötig?
Gerne helfen wir weiter: Kontaktformular